Stage 1. Running The Installation Script; Running The Installation Script On Unix - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Stage 1. Running the Installation Script

The
setup
Netscape Console, and Certificate Management System and installs the binaries
under the server root directory you have specified. It creates one instance of the
Administration Server, one instance of the Directory Server, and one instance of the
Certificate Management System, which is not yet configured. The
also installs Netscape Console and automatically starts the Administration Server
and Directory Server.
As you run the initial installation script, the program stores your configuration
choices and generates a initialization file, or installation cache. As installation
proceeds, the stored initialization file states information about your choices so far.
As a result, you can stop the installation process and restart it as necessary. Your
choices to the point at which you stopped the installation are automatically
restored by the initialization file, and the installation prompts resume at the point
in which you left off.
This initialization file applies only to the installation of the Administration Server
and Directory Server. If you want to use the file to do additional "silent"
installations, see the documentation for these servers.

Running the Installation Script on UNIX

To run the installation script on UNIX, follow these steps:
Log in as
1.
but not required. If you are not
directory to which you have write access, using ports higher than 1024, for
which you are the administrator for all services.
Change to the directory on the distribution CD, and run the
2.
Answer the questions that the script asks. You should have previously
3.
collected the requested information in the section "Information for UNIX
Installation Script" of Chapter 5, "Installation Worksheet." Most questions
have a default answer shown in square brackets before the prompt. To accept
the default answer, press Enter at the prompt.
Answer the questions for a typical installation as follows:
Would you like to continue with setup? [Yes]: Press Enter.
1.
Do you agree to the license terms? [No]: Type
2.
program extracts files for the Administration Server, Directory Server,
to install the servers on a UNIX system. This is recommended,
root
Stage 1. Running the Installation Script
, you can install only a local version in a
root
and press Enter.
yes
Chapter 6 Installing Certificate Management System
program
setup
program.
setup
215