Step 6. Verify Mail Server Settings - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Configuring a Subsystem to Run Automated Jobs
Enter information as appropriate:
2.
Enable Job Scheduler. Check this option to enable the Job Scheduler. To
disable the Job Scheduler uncheck the option; disabling turns off all the jobs.
Check Frequency. Type the frequency at which the Job Scheduler daemon
thread should wake up and call the configured jobs that meet the cron
specification. By default, it is set to one minute.
To save your changes, click Save.
3.
The CMS configuration is modified. If the changes you made require you to
restart the server, you will be prompted accordingly. In that case, restart the
server.

Step 6. Verify Mail Server Settings

The Certificate Manager and Registration Manager use the mail server specified in
the SMTP tab (of the CMS window) for routing or sending email notifications
automatically. If you've already set it up, you should verify that the host name and
port number of the mail server are accurate. Otherwise, follow the procedure
below to specify the mail server details.
To identify the mail server that the Certificate Manager or Registration Manager
should use for routing email notifications:
In the CMS window, select the Configuration tab, and then in the right pane,
1.
select the SMTP tab.
554 Netscape Certificate Management System Installation and Setup Guide • March 2002