Installing A Standalone Data Recovery Manager - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Configuration Status. This screen should indicate that your configuration has
26.
been successful.
Click Done to exit the Installation Wizard.
Proceed to the next step, "Stage 3. Enrolling for Administrator/Agent
27.
Certificate" on page 271, to create the first agent user for the Registration
Manager.

Installing a Standalone Data Recovery Manager

To install a standalone Data Recovery Manager:
Subsystems. Select Data Recovery Manager.
1.
Click Next to continue.
Network Configuration. Type the numbers for the ports to be used by the
2.
CMS instance. If you want to enable the non-SSL end-entity port, be sure to
check the "Enable" checkbox.
Click Next to continue.
Key-Pair Information for Data Recovery Manager Transport Certificate.
3.
Select the token to store the transport certificate and key pair. If you have not
previously initialized the token's password, you must do so in this screen. Also
specify the key type and length.
Click Next to continue.
Message Digest Algorithm. Select the algorithm to use for computing the
4.
certificate signature. The choices are: SHA-1, MD2, or MD5.
Click Next to continue.
Subject Name for Data Recovery Manager Transport Certificate. Type the
5.
values for the subject DN components; these values identify the transport
certificate.
Click Next to continue.
Certificate Extensions for Data Recovery Manager Transport Certificate.
6.
Select the required extensions. The default settings should work for most
deployments. If necessary, you can add an additional extension by pasting its
base-64 encoding in the space provided on this screen.
Stage 2. Running the Installation Wizard
Chapter 6 Installing Certificate Management System 249