Enrolling For A Certificate From The End-Entity Gateway - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Using the Default Demo
Click End Users Services.
4.
The Enrollment tab for the non-SSL end-entity gateway appears.
Click the Retrieval tab.
5.
The form that appears is for the option, List Certificates.
Type
6.
the certificates that the Certificate Manager has issued so far.
If you followed the instructions in this chapter exactly, you should see three
certificates listed: the CA signing certificate (
Manager SSL server certificate (
certificate (
Use the browser's Back button to go back to the Services Summary page. (For
7.
example, when using Communicator, press and hold the mouse button while
it's over the Back button, then choose Index from the pop-up menu.)

Enrolling for a Certificate From the End-Entity Gateway

After following the previous procedure, your browser will be at the Services
Summary page. Follow this procedure to submit an enrollment request through the
end-entity gateway.
Click SSL End-Users Services.
1.
The Enrollment tab for the SSL end-entity gateway appears.
Use the Manual User Enrollment form that appears to enroll for a certificate.
2.
For Full Name, type the name
distinct from your administrator's certificate. When you have finished filling it
out, submit the form.
138 Netscape Certificate Management System Installation and Setup Guide • March 2002
into the field labeled "Lowest serial number," then click Find to list
0x0
CN=CMS administrator
CN=Demo CA
CN=<your hostname>
).
, so you will recognize this certificate as
User1
), the Certificate
), and your initial agent