Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual page 615

Follow the instructions in the file and add the mapping information for the
3.
entry you added.
The figure above shows the following mapping rule being added to the file:
certmap myCA
#myCA:DNComps
myCA:FilterComps
This mapping rule specifies that if the name of the CA that signed the
certificate used for SSL client authentication by the Certificate Manager is
and that the issuer name or DN of the CA is
server should use the
If you determine that the
(because your certificate subject name has no overlap with the corresponding
directory DN), you may need to modify the default base DN in Directory
Server by adding the following to the Directory Server configuration file:
dn: cn=config
changetype: modify
replace: nsslapd-certmap-basedn
nsslapd-certmap-basedn: dc=example, dc=com
Save your changes, and close the file.
4.
Configuring a Certificate Manager to Publish Certificates and CRLs
CN=rootCA, O=example.com
attributes to locate the entry.
FilterComps
file needs an empty
certmap.conf
CN=rootCA, O=example.com
DNComps
Chapter 19 Setting Up LDAP Publishing
myCA
, the
mapping
615