Step 1. Get The Required Ssl Server Certificates; Step 2: Update The Configuration - Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual

Configuring the Server's Security Preferences
This configuration involves the following steps:
•

Step 1. Get the Required SSL Server Certificates

•

Step 2: Update the Configuration

Step 1. Get the Required SSL Server Certificates
You must first request and install the required number of SSL server certificates for
the particular CMS instance. For instructions, see "Getting New Certificates for the
Subsystems" on page 465.
Once you have installed the certificates, you should be able to see them in the list of
SSL server certificates in the Encryption tab of the CMS window.
Step 2: Update the Configuration
After you verify that the certificates are installed, configure the server as follows:
Stop the CMS instance; see "Stopping Certificate Management System" on
1.
page 310.
Go to this directory:
2.
In a text editor, open the
3.
Locate the
4.
460 Netscape Certificate Management System Installation and Setup Guide • March 2002
<server_root>/cert-<instance_id>/config
servercertnickname
To change the certificate used for authenticating to the Agent Services
interface, edit the value assigned to the
the section.
id="agent"
file.
server.xml
parameter for the interface of your interest.
servercertnickname
parameter in