Registration Manager Signing Certificate Issuer
If you are submitting your certificate request to a third-party CA, follow the
instructions provided by that CA.
If you are submitting your certificate request to another Certificate Manager, you
need to know its URL:
•
End-entity URL for issuing a Certificate Manager__________________________
Enter the URL for the end-entity gateway of the Certificate Manager that will issue
the Registration Manager's signing certificate. For example,
http://<hostname>:17006
Data Recovery Manager Configuration
This section summarizes information required to configure a Data Recovery
Manager.
NOTE
Transport Certificate
Key-Pair Information for Transport Certificate
For a discussion of issues related to key type and length, see "CA Signing Key Type
and Length" on page 170.
•
Token for storing the transport certificate signing certificate and private
key________________________________________
Enter either
external token. If you are using an external token, you will need to install it
before you run the Installation Wizard. In the wizard, you can select from a list
of already installed and available tokens. For example,
installation instructions, see "Installing External Tokens" on page 432.
.
If you want to use hardware tokens for generating and storing Data
Recovery Manager's key pairs, you'll need at least two tokens: one
exclusively for the storage key pair and the other for the remaining
key pairs. Be sure to install (and initialize, if required) these tokens
before you start the Data Recovery Manager installation.
(if you plan to use the internal token) or the name of an
internal
Data Recovery Manager Configuration
. For
SmartCard
Chapter 5
Installation Worksheet
199
Need help?
Do you have a question about the NETSCAPE MANAGEMENT SYSTEM 6.0 and is the answer not in the manual?
Questions and answers