Netscape MANAGEMENT SYSTEM 6.0 Installation And Setup Manual page 220

Stage 1. Running the Installation Script
Directory Server 6.0 Server Settings
8.
When all three values are correct, click Next.
Directory Server 6.0 Netscape Configuration Directory Server Administrator.
9.
Enter the administrator ID and password of the user who will authenticate to
the directory console with full privileges. (Think of this as the root or superuser
identity for Directory Server.) The password must be at least one character
long. If you are using an existing configuration directory, enter its
administrator ID and password. Click Next to continue.
Directory Server 6.0 Administration Domain. Click Next to accept the default
10.
value. This name, which should be your organization's domain name, will be
used for the collection of servers that use the same configuration directory.
Directory Server 6.0 Directory Manager Settings. Enter the distinguished
11.
name and password of the directory manager for the configuration directory.
The password must be at least eight characters long.
This DN can be short and does not need to conform to any suffix configured for
your directory. It also should not correspond to an actual entry stored in your
directory. Click Next to continue.
Administration Server Port Selection. A randomly selected port number will
12.
be shown. Accept the default port number, or enter any port number that is not
and will not be used for another purpose. Click Next to continue.
Netscape Certificate Management System Server Identifier. Enter a unique
13.
identifier for the new instance of Certificate Management System. Click Next to
continue.
Configuration Summary. This screen shows all of the components you are
14.
installing and the choices you have made for their configuration. Click Next to
continue.
220 Netscape Certificate Management System Installation and Setup Guide • March 2002
Server Identifier. Enter a unique identifier for the new instance of the
configuration directory. If you are using an existing configuration
directory, enter its identifier.
Server Port. Accept the default, or enter any port number that is not and
will not be used for another purpose. The default is 389 if that port is not
already used; otherwise, it is a randomly selected port number. If you are
using an existing configuration directory, enter its port number.
Suffix. Accept the default value for the suffix, or base DN, to be used for
the directory tree.