•
Use existing key and certificate? ___________________
Answer yes, otherwise you are creating a new Certificate Manager and not a
clone.
•
Instance name of the original server ____________________________
•
Token name where copied keys are stored _______________________
•
Token password ___________________________________________
SSL Server Key and Certificate
If the clone uses the same hostname, you can use the same SSL server certificate
and key copied from the original server. Otherwise, answer no and continue with
the next section, "SSL Server Certificate Configuration."
•
Use existing SSL server key and certificate? Yes____ No______
•
Instance name of the original server ____________________________
•
Token name where copied keys are stored _______________________
•
Token password ___________________________________________
SSL Server Certificate Configuration
When you install an instance of Netscape Certificate Management System, you
must supply information for the SSL server certificate used by that instance to
identify itself. The same SSL certificate is shared by all subsystems installed in that
instance.
SSL Server Certificate
Key-Pair Information for SSL Server Certificate
•
Token for storing the SSL server certificate and private key__________________
Enter either
external token. If you are using an external token, you will need to install it
before you run the Installation Wizard. In the wizard, you can select from a list
of already installed and available tokens. For example,
installation instructions, see "Installing External Tokens" on page 432.
(if you plan to use the internal token) or the name of an
internal
SSL Server Certificate Configuration
. For
SmartCard
Chapter 5
Installation Worksheet
207