GE 60-806-95R-16Z - Security Concord Express System Control Panel Installation Instructions Manual page 50

System Master Code (110)
The System Master Code performs
all system operations and user pro-
gramming.
Downloading (20)
This setting determines whether or not the
panel can communicate with ToolBox software
for programming the system from off-site.
Note
The panel must have a Downloader phone num-
ber and Downloader code programmed and be
connected to a phone line for this feature to work.
Silent Arming (21)
This setting determines whether the partition
arms the system with (off) or without (on)
sounding status beeps from sirens and the
touchpad.
Note
Turning this feature on will double the exit time.
This option is not available when SIA False Alarm
Reduction (0003) is on.
Touchpad Brightness (22)
This setting lightens or darkens the background
on touchpad displays. Each touchpad display
can be set independently to compensate for
lighting conditions in the touchpad location.
45
¾
To change the System Master Code:
1. With the display showing
.
TER CODE
and
2. Press ƒ the display shows
3. Enter a new 4-digit code. The display flashes the entered code. Press ƒ and the display
shows the new code.
Options Menu
The OPTIONS menu lets you set up the system for downloading and silent arming, and lets you
adjust alphanumeric touchpad display brightness.
¾
To turn Downloading off or on:
1. Enter user programming with the system master code. The display shows
TIME AND DATE
2. Press A or B until the display shows
3. Press ƒ and the display shows
4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press ƒ
and the display shows the new setting.
¾
To turn Silent Arming off or on:
1. Enter user programming mode with the system master code. The display
shows
TIME AND DATE
2. Press A or B until the display shows
3. Press ƒ , then B and the display shows
ting).
4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press ƒ
and the display shows the new setting.
¾
To adjust Touchpad Brightness:
1. Enter user programming mode with the system master code. The display
shows
TIME AND DATE
2. Press A or B until the display shows
3. Press ƒ , then B twice and the display shows
rent setting).
4. Enter a setting from 0 (darkest background) to 3 (brightest background). The
display flashes the entered selection. Press ƒ and the display shows the new
setting.
, press ƒ then B . The display shows
USER CODES
SYSTEM MASTER nnnn
.
OPTIONS
DOWNLOADING OFF/ON
.
OPTIONS
SILENT ARMING OFF/ON
.
OPTIONS
User Codes (Default=1234)
SYSTEM MAS-
(current code).
Options (Default=on)
.
(current setting).
Options (Default=off)
.
(current set-
Options (Default=2)
.
TOUCHPAD BRIGHTNESS n
Programming the Panel
(cur-