Table of Contents
Advertisement
High Level Rpts (0101-cs phone 1, 0111-cs phone 2)
When this setting is on, the panel reports to the central station events that
involve a high-level security risk, including the following conditions:
•
Fire, Police, Auxiliary, Duress, and Freeze alarms
•
No Activity
•
Receiver Failure (or jam)
•
System Tamper (40 incorrect keystrokes or touchpad supervisory),
•
Entering or exiting Sensor Test mode
Note
For UL 1635 listed installations, this feature must be set to on for the programmed
phone number.
Low Level Rpts (0102-cs phone 1, 0112-cs phone 2)
When this setting is on, the panel reports non-alarm conditions to the central
station, including the following conditions:
•
Force Armed
•
Hardwire Zone Trouble (open or short)
•
Supervisory (wireless devices)
•
Low Battery (wireless devices)
•
Other non-alarm related conditions
Note
For UL 1635 listed installations, this feature must be set to on for the programmed
phone number.
Open/Close Rpts (0103-cs phone 1, 0113-cs phone 2)
When this setting is on, the panel sends a report when the system is armed
(closed) or disarmed (opened).
Note
To use this feature, the Opening Reports and Closing Reports settings under the
REPORTING
menu must be turned on.
Backup (0104-cs phone 1, 0114-cs phone 2)
This setting determines whether or not the panel uses another programmed
central station phone number for reporting if three initial attempts are unsuc-
cessful.
CS Phone 1 is backed up by CS Phone 2, and CS Phone 2 is backed up by
CS Phone 1. The panel makes up to 16 attempts (8 per phone number), alter-
nating between the two programmed phone numbers.
For example, if Backup is on and three failed reporting attempts occur using
CS Phone 1, the panel switches to CS Phone 2 for three more reporting
attempts. If these attempts fail, the panel switches back to CS Phone 1 for
five more reporting attempts and, if necessary, switches back to CS Phone 2
for five final attempts.
Programming the Panel
Phones-CS Phone 1-2 (Default: CS Phone
1=on, CS Phone 2=off)
¾
To turn High-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press ƒ and the display shows the new set-
ting.
Phones-CS Phone 1-2 (Default: CS Phone
1=on, CS Phone 2=off)
¾
To turn Low-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press ƒ and the display shows the new set-
ting.
Phones-CS Phone 1-2 (Default=off)
¾
To turn Opening/Closing Reports off or
on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press ƒ and the display shows the new set-
ting.
Phones-CS Phone 1-2 (Default: CS Phone
1=on, CS Phone 2=off)
¾
To turn Backup off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on).
The display flashes the entered setting.
2. Press ƒ and the display shows the new set-
ting.
HIGH LEVEL RPTS
LOW LEVEL RPTS
OPEN/CLOSE RPTS
BACKUP OFF/ON
24
Hide quick links:
Advertisement
Table of Contents
