Table of Contents
Advertisement
Reporting Format (0105-cs phone 1, 0115-cs phone 2)
This setting determines whether the panel uses the SIA or CID (Contact ID)
reporting format for central station communication.
Phone Number (0120-pager 1, 0130-pager 2, 0140-pager 3)
This setting is used for programming a phone number that communicates to
a pager. Phone numbers can be 1-24 digits long, and can include pauses or *
and # characters.
To enter pauses, press C . To enter *, press and hold 7 for one second. To
enter #, press and hold 9 for one second.
Note
Call-waiting services should be disabled to prevent interruptions to panel commu-
nication to the central monitoring station (or pager). To program a dialing prefix
that disables call-waiting, see the Call Wait Cancel setting under the menu
OPTIONS—GLOBAL
.
High Level Rpts (0121-pager 1, 0131-pager 2, 0141-pager 3)
When this setting is on, the panel reports to the pager events that involve a
high-level security risk, including the following conditions:
•
Fire, Police, Auxiliary, Duress, and Freeze alarms
•
No Activity
•
Receiver Failure (or jam)
•
System Tamper (40 incorrect keystrokes or touchpad supervisory),
•
Entering or exiting Sensor Test mode
Low Level Rpts (0122-pager 1, 0132-pager 2, 0142-pager 3)
When this setting is on, the panel reports non-alarm conditions to the pager,
including the following conditions:
•
Force Armed
•
Hardwire Zone Trouble (open or short)
•
Supervisory (wireless devices)
•
Low Battery (wireless devices)
•
Other non-alarm related conditions
25
The following describes how to program the phone settings that appear under
Phones-CS Phone 1-2 (Default=all CID)
¾
To select SIA or CID Reporting Format:
1. With the display showing
(current setting), press 1 (for
MAT SIA/CID
SIA) or 2 (for CID). The display flashes
the entered setting.
2. Press ƒ and the display shows the new set-
ting.
Phones-Pager Phone 1-3 (Default=none)
¾
To program a Pager Phone Number:
1. With the display showing
(or current number), enter the desired pager
phone number including pauses. The dis-
play flashes the entered number.
2. Press ƒ and the display shows the new
number.
¾
PHONE
To delete a Pager Phone Number:
1. With the display showing
(current number), press D . The display
shows
PHONE NUMBER _
Phones-Pager Phone 1-3 (Default=on)
¾
To turn High-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press ƒ and the display shows the new set-
ting.
Phones-Pager Phone 1-3 (Default=off)
¾
To turn Low-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press ƒ and the display shows
(new setting).
RPTS OFF/ON
REPORTING FOR-
PAGER PHONE 1-3
.
PHONE NUMBER _
PHONE NUMBER _
.
HIGH LEVEL RPTS
LOW LEVEL RPTS
LOW LEVEL
Programming the Panel
Hide quick links:
Advertisement
Table of Contents
