Table of Contents
Advertisement
Downloader Code (0000)
Downloader Code (0000)
The 5-digit downloader code is used in conjunction with downloader pro-
gramming. The down-loader operator must have the panel account number
and downloader code in order to perform any programming.
Note
The Downloader Code cannot be deleted from panel memory. To change the
Downloader Code to its default setting, enter 12345 in the procedure to the right.
The Downloader Code will be reset to defaults during a Memory Clear only if the
Dealer Code is not set OR if the Dealer Code is used to initiate the Memory Clear.
Installer Code (0001)
The 4-digit installer code is used for entering program mode and changing
system settings. If a dealer code is programmed, only those settings not asso-
ciated with phone numbers can be changed.
Note
The Installer Code cannot be deleted or cleared from panel memory. To change
the Installer Code to its default setting, enter 4321 in the procedure above.
Programming the Panel
Using Shortcut Numbers
To go directly to a setting in tier 2, you can enter the shortcut number for that setting. Shortcut
numbers in this manual appear in parenthesis ( ), next to the setting name. For example this
heading shows the Downloader Code shortcut to be 0000.
Shortcut numbers can be used from any setting location within tier 2.
¾
To advance to tier 2 program menus:
Š With the system in program mode and the display showing
once. The display should show
Security Menu
The
menu lets you choose whether security settings affect the whole system (global)
SECURITY
or a specific partition.
Important !
Each security access code (Installer, Dealer, System Master, or User) must be unique. Do not use the
same combination of numbers for any two codes.
¾
To access global or partition security menu items:
1. With the display showing
2. Press ƒ again to advance to global settings
OR
Press A or B to display
The following describes how to program the security settings that appear under
SECURITY.
, press ƒ . The display should show
SECURITY
, then press ƒ to advance to partition 1 settings.
PARTITION 1
¾
To program a Downloader Code:
1. With the display showing
CODE nnnnn
5-digit code, + ƒ . The display flashes the
entered code.
2. Press ƒ and the display shows
LOADER CODE nnnnn
¾
To program an Installer Code:
1. With the display showing
nnnn
code + ƒ . The display flashes the entered
code.
2. Press ƒ and display shows
nnnn
System Programming
SYSTEM PROGRAMMING
GLOBAL
GLOBAL
Security-Global (Default = 12345)
DOWNLOADER
(current code), enter the desired
(new code).
Security-Global (Default = 4321)
INSTALLER CODE
(current code), enter the desired 4-digit
INSTALLER CODE
(new code).
, press ƒ
.
.
DOWN-
20
Hide quick links:
Advertisement
Table of Contents
