Managing Rgb Image Color For Selected Images - MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual

For Intent, choose a method for translating colors between color spaces in
9
different devices in the workflow. For more information, see "About rendering
intent" on page 310.
If you are printing proofs of four-color separations on a composite printer,
10
select Composite Simulates Separations to print simulated color separations.
Note:
If you selected Composite Simulates Separations in step 10, choose a printer
11
profile for Composite Printer to be used for printing simulated color
separations. For more information, see "Choosing printer profiles" on page 308.
For Default RGB Image Source, choose a device profile based on how the
12
image was created, to improve the display and output of RGB images.
You can also select profiles for individual RGB images. For more information,
see "Managing RGB image color for selected images" on page 311.
Click OK to close the Color Management Setup dialog box, and click OK
13
again to close the Preferences dialog box.
If the Kodak Digital Science CMS is correctly installed, it will appear in the
Color Management section of the Colors Preferences dialog box, in the Type
pop-up menu. If the KDS option does not appear, you can verify that it is
installed on your system.
•
In Windows, run the RegKodak.exe utility, located in the Support folder
within the FreeHand 10 folder on the FreeHand installation CD.
•
On the Macintosh, verify that the file named KodakCMSCP is in the
FreeHand application folder.
Note:
You can choose a printer profile to specify the type of printer that will be used to
print four-color separations. The Separations Printer options include ICC-
compatible CMYK printer profiles.