MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 191

Do one of the following:
4
•
Choose Edit > Paste in Front to paste the cut/copied object in front of the
selected object.
•
Choose Edit > Paste Behind to paste the cut/copied object behind the
selected object.
You can name an object or add a note to it using the Navigation panel. You can
also use the Navigation panel to check object names and notes.
Names and notes can be exported as annotations when you export a FreeHand drawing
to PDF format. For more information, see "Exporting PDF files" on page 440.
Choose Window > Panels > Navigation.
1
In the Navigation panel, type a name for the object in the Name text box.
2
Names can be up to 26 characters long.
Type a note in the Note text box. Notes can be up to 254 characters long.
3
Names and notes are applied when you type them. You don't need to press
Enter or close the Navigation panel to apply your changes.
Choose Window > Panels > Navigation. The object's name and note are displayed
in the Navigation panel.
You can quickly make global changes to your artwork—including rotating and
scaling multiple objects—using the Find & Replace Graphics command. You can
search for and replace objects by name or by characteristics. The Find & Replace
Graphics dialog box has two tabs: Find & Replace, and Select.
The Find & Replace Graphics command lets you rotate and scale objects relative
to each object's center. These operations aren't available when using the
transformation tools alone.
To make changes to layers using the Find & Replace Graphics command, you
must make sure the layers are not locked or hidden. For more information, see
"Using layers" on page 237.