MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 151

Hold down Shift as you place a point.
Click the Pen or Bezigon tool. You can continue a Pen path with the Bezigon
1
tool and vice versa.
Click or drag to draw additional segments.
2
To place a path segment at a sharp angle to a preceding curve, click the curve
point to retract its handle. Then drag or click to set the next point as desired.
Placing a path segment at a sharp angle
Double-click the last point or press Tab to finish the path.
3
•
Use the Pointer or Subselect tool to drag one end point over the other end point.
•
Choose Window > Inspectors > Object. In the Object inspector, select Closed
to automatically connect the end points of the path with a new path segment.
•
In Windows only, right-click the path and choose Path > Closed from the
pop-up menu.
•
Choose Window > Inspectors> Object. In the Object inspector, deselect
Closed to remove the last path segment from the path.
•
In Windows only, right-click the path and choose Path > Open from the
pop-up menu.