MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 153

You can reshape a path by moving points and path segments, and by adjusting a
point's handles by dragging with the Pointer or Subselect tools.
You can also modify a path using the Object inspector or the Freeform tool. For
information on using the Freeform tool, see "Editing a path with the Freeform
tool" on page 156.
Do one of the following:
1
•
Click the Pointer tool in the Tools panel if you are selecting points on an
ungrouped path.
•
Click the Subselect tool in the Tools panel if you are selecting points on a path
that is part of a group.
Click a point to select it. Shift-click to select additional points.
2
Drag any of the selected points to move all of the selected points to the
3
new location.
Click the Pointer tool and select the path.
1
Click a point to display its handles. The adjacent handles of the points on
2
either side of the selected point will also be displayed.