MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 115

•
Symbols and master pages
•
All objects
•
Custom brushes
•
Custom colors
•
Custom page sizes
•
Custom units of measurement
When you open a template, an untitled copy of the template appears. You use the
untitled copy to create a new template or replace an existing template. You can
also designate a template as the default for all new documents.
Choose File > Save As.
1
Enter a name for your template file in the Save Document dialog box
2
(Windows) or Save dialog box (Macintosh).
Choose FreeHand Template from the Save as Type pop-up menu (Windows) or
3
FreeHand Template from the Format pop-up menu (Macintosh).
Choose a destination and click Save. In Windows, an FT10 extension is added
4
to the file name.
Open the template, make changes, and then choose File > Save As.
1
Save the newly revised document as a template with the same name
2
and location.
FreeHand prompts you to replace the original template file. Click Yes
3
(Windows) or Replace (Macintosh).
The new template replaces the old one.
Select the FreeHand file in the Finder.
1
Choose File > Get Info and select Stationery Pad.
2
To convert a template into a regular FreeHand document, deselect
Stationery Pad.