MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 313

For Monitor Simulates, choose how to set your monitor to simulate the color
4
gamut displayed by the final output device:
•
Choose None to display RGB colors according to the monitor profile and
CMYK colors as RGB according to the printer profile. This option leaves the
monitor display and printer profiles unchanged.
For example, an artist designing graphics for onscreen display might choose
None for Monitor Simulates in order to create a brighter RGB display.
•
Choose Separations Printer to simulate the appearance of printed color
separations, in which each color is printed to a separate plate.
Click OK.
5
In the Colors Preferences dialog box, under Color Management, choose Kodak
1
Digital Science or Apple ColorSync from the Type pop-up menu.
Select Rebuild Color Tables for FreeHand to automatically rebuild the default
2
color tables according to the Color Management System you selected in step 1.
Click Setup.
3
In the Color Management Setup dialog box, for Monitor choose an
4
ICC-compatible monitor profile to be used for managing color on your
monitor.
For Separations Printer, choose a printer profile to be used for printing color
5
separations.
Click OK to close the Color Management Setup dialog box.
6
In the Colors Preferences dialog box, under Color Management, choose Color
7
Tables from the Type pop-up menu.
Note:
Click OK to close the Colors Preferences dialog box.
8