MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 146

To modify the spiral as you draw, use any of the following keys:
3
•
Press Shift to constrain the placement of the final point.
•
Press Alt (Windows) or Option (Macintosh) to draw from the center regardless
of the selected drawing option.
Choose Window > Toolbars > Xtra Tools to display the Xtra Tools panel.
1
Double-click the Arc tool.
2
In the Arc dialog box, select from the following options:
3
•
Select Create Open Arc to draw only the arc curve. Deselect this option to
draw the arc as a quarter pie shape.
•
Select Create Flipped Arc to flip the orientation of the arc.
•
Select Create Concave Arc to draw the arc with an outer corner.
Concave (left), Open (center), and Flipped (right)
Click OK.
4
Choose Window > Toolbars > Xtra Tools to display the Xtra Tools panel.
1
Click the Arc tool and drag to draw an arc.
2
To modify the arc as you draw, press any of the following keys, alone or in
3
combination, after you begin drawing the arc:
•
Press Shift to constrain the arc.
•
Press Alt (Windows) or Option (Macintosh) to draw a flipped arc.
•
Press Control (Windows) or Command (Macintosh) to draw a closed arc.
•
On the Macintosh only, press Control to draw a concave arc.
•
In Windows only, press Control and hold down the right mouse button as you
draw to create a concave arc.