MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 13

This section describes how to install FreeHand on your hard disk and start the
application.
Before you begin, make sure your computer meets the system requirements listed
under "System requirements" on page 12. Read the Read Me document on the
FreeHand CD-ROM for late-breaking information.
Disable any virus-protection application.
1
Insert the FreeHand CD-ROM in your CD-ROM drive.
2
Follow the onscreen instructions. The FreeHand installer prompts you to enter
3
the serial number found on your registration card.
Launch FreeHand from the Windows Start menu by selecting Start > Programs
4
> Macromedia FreeHand 10 > FreeHand 10.
Insert the FreeHand CD-ROM in your CD-ROM drive.
1
From the Apple menu, choose Control Panels > Extensions Manager.
2
Disable virus-protection extensions and restart your computer.
3
The root folder of the CD-ROM appears on your desktop.
Open the FreeHand 10 folder.
4
Double-click the FreeHand 10 Installer icon to launch the FreeHand installer.
5
When the FreeHand installer screen displays, follow the onscreen instructions.
6
The FreeHand installer prompts you to enter the serial number found on your
registration card.
Once the installation is complete, the FreeHand folder opens on your desktop.
If prompted, restart your computer.
7