MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 215

For Depth, enter a value up to 72 or drag the slider between 1 and 20 to
4
control the distance by which the effect is raised or impressed.
For Angle, enter a value or drag the dial to set the angle for the light source.
5
Angle affects the direction of the highlight and shadow.
Select Soft Edge to blend the relief for the Emboss or Deboss effect.
6
Click Apply to preview the effect, or click OK to apply the effect and close
7
the dialog box.
The 3D Rotation Xtra tool applies three-dimensional rotations to
two-dimensional objects.
Choose Window > Toolbars > Xtra Tools.
1
Double-click the 3D Rotation tool in the Xtra Tools toolbar to display the
2
3D Rotation panel.
Select the amount of control over the rotation, Easy or Expert.
3
Choose the point of rotation from the Rotate From pop-up menu:
4
•
Mouse Click rotates from the point you click with your mouse.
•
Center of Selection rotates from the center of the object selected.
•
Center of Gravity rotates by the visual center of the object.
•
Origin rotates from the lower left corner of the object.
Enter a Distance value, or drag the slider to the left (smaller values) to
5
maximize distortion, or drag to the right (larger values) to minimize distortion.
If you selected the Expert option, choose the point of projection, or
6
vanishing point.
•
Mouse Click makes the projection extend to the location you click with
your mouse.
•
Center of Selection makes the projection center behind the selected object.