MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 225

•
Choose Xtras > Distort > Add Points.
Added Points
Choose Window > Toolbars > Xtra Tools toolbar.
1
Click the tool corresponding to the desired effect, as follows:
2
•
Roughen creates a jagged effect.
•
Fisheye Lens creates a concave or convex effect.
•
Bend creates a bloated or spiked effect.
Drag applies the distortion to the selection.
3
Note:
Double-click the Roughen button in the Xtra Tools toolbar to display the
1
tool's dialog box.
For Amount, enter the number of points added per inch, from 0 to 100.
2
For Edge, select Rough to use corner points to create a jagged edge or Smooth
3
to use curve points to create a smooth, hand-drawn distorted edge.
Click OK.
4