MACROMEDIA FLASH 8-USING FLASH Use Manual page 573

Configuring a Hot Spot interaction
The Hot Spot learning interaction sets up an interaction in which the user responds by
clicking an object (or objects) onscreen.
An example of a Hot Spot interaction created with the quiz template
To configure a Hot Spot interaction:
1.
If you are not using a quiz template, place the learning interaction on the Stage. If you are
using a quiz template, select the frame on the Interactions layer that contains the Hot Spot
interaction (Frame 5, if you have not added or removed keyframes).
2. Break the movie clip apart (Modify > Break Apart), display the Component inspector, and
then type the interaction ID and the question. See
component" on page
3.
For each hot spot, select or deselect the Correct option to specify whether the object is
considered a correct or incorrect response when the user clicks it. You can select multiple
correct answers.
4.
You can delete the placeholder instances on the Stage. Place your movie clips on the Stage
and use the Property inspector to give each movie clip the same instance name that you
specified in the Component inspector.
558.
"Configuring a Learning Interaction
Configuring learning interactions 573