MACROMEDIA FLASH 8-USING FLASH Use Manual page 571

Configuring a Hot Object interaction
The Hot Object interaction accepts one to eight hot objects. The default sample uses six
hot objects.
To configure a Hot Object interaction:
1.
If you are not using a quiz template, place the learning interaction on the Stage. If you are
using a quiz template, select the frame on the Interactions layer that contains the Hot
Object interaction (Frame 5, if you have not added or removed keyframes).
2.
Break the movie clip apart (Modify > Break Apart), display the Component inspector, and
then type the interaction ID and the question. See
component" on page
3.
For each object, select or deselect the Correct option to specify whether the object is
considered a correct or incorrect response when the user clicks it. You can have multiple
correct selections.
4. Select each instance of the Hot Object interaction on the Stage (you can delete the
placeholder instances and place your own movie clip instances on the Stage). Use the
Property inspector to give each instance the same instance name that you specified in the
Component inspector.
558.
"Configuring a Learning Interaction
Configuring learning interactions 571