MACROMEDIA FLASH 8-USING FLASH Use Manual page 463

9.
If you want to use the settings selected in step 8 to override settings for individual sounds
selected in the Sound section of the Property inspector, select Override Sound Settings.
You might want to select this option to create a smaller low-fidelity version of a SWF file.
If the Select Override Sound Settings option is deselected, Flash scans all stream
sounds in the document (including sounds in imported video) and publishes all
stream sounds at the highest individual setting. This can increase file size, if one or
more stream sounds has a high export setting.
10. (Flash Professional only) To export sounds suitable for devices, including mobile devices,
instead of the original library sound, select Export Device Sounds. For more information,
see "About using sounds in Flash Lite" on page
file, click OK.
11.
Select the Flash security model you want to use from the Local playback security pop-up
menu.
You must specify if you want your published SWF file to be granted local or network
security access. Selecting Local Access Only lets the published SWF file interact with files
and resources on the local system, but not on the network. Selecting Access Network Only
lets the published SWF file interact with files and resources on the network, but not on
the local system.
For more information, see
Setting the classpath
To use an ActionScript class that you've defined, Flash must locate the external ActionScript
2.0 files that contain the class definition. The list of folders in which Flash searches for class
definitions is called the classpath. Classpaths exist at the global/application level and at the
document level. For more information about classpaths, see Chapter 7, "Classes" in Learning
ActionScript 2.0 in Flash.
To modify the document-level classpath:
1. Select File > Publish Settings to open the Publish Settings dialog box.
2. Click the Flash tab.
3. Verify that ActionScript 2.0 is selected in the ActionScript Version pop-up menu and
click Settings.
4. In the ActionScript Settings dialog box, specify the frame on which the class definition
should reside in the Export Frame for Classes text box.
"About local and network playback security" on page
326. To save the settings with the current
Publishing Flash documents
458.
463