MACROMEDIA FLASH 8-USING FLASH Use Manual page 303

The following behaviors come with Flash Basic 8 and Flash Professional 8, and are used to
control embedded video:
Behavior
Play Video
Stop Video
Pause Video
Rewind Video
Fast Forward Video Fast-forwards the video by the
Hide Video
Show Video
For lessons on working with video, see "Tutorial: Building a Video Player (Flash Professional
only)" in Getting Started with Flash.
To add and configure a behavior:
1.
Select the movie clip that will trigger the behavior.
2.
In the Behaviors panel (Window > Behaviors), click the Add (+) button, and select the
desired behavior from the Embedded Video submenu.
3.
In the dialog box that appears, select the video you want to control with the behavior.
4.
Select a Relative or Absolute path. For more information, see
target paths" on page
5.
If required, select settings for the behavior parameters and click OK.
Default event and actions for the behavior appear in the Behaviors panel.
6. In the Behaviors panel under Event, click On Release (the default event) and select a mouse
event from the menu. If you want to use the On Release event, leave the option unchanged.
Purpose
Plays a video in the current
document.
Stops the video.
Pauses the video.
Rewinds the video by the specified
number of frames.
specified number of frames.
Hides the video.
Shows the video.
39.
Parameters
Instance name of target video
Instance name of target video
Instance name of target video
Instance name of target video
Number of frames
Instance name of target video
Number of frames
Instance name of target video
Instance name of target video
"Using absolute and relative
Controlling video playback using behaviors 303