MACROMEDIA FLASH 8-USING FLASH Use Manual page 450

: A number that uniquely identifies the operation within the transaction. This
id
information should accompany the results packet returned to this component.
: This attribute contains the new value for a field that was modified. It appears
newValue
only when the field value has changed.
: This attribute is
key
value is determined by the combination of the RDBMSResolver component's
parameter, the
updateMode
delete, update).
The following table describes how the key attributes value is determined. If a field is defined
as a key field, using the RDBMSResolver component's
appear in the update packet with
update packet will be set according to the following table:
Node type
delete
insert
update
About receiving results from an external data source
This section describes requirements that your server code must fulfill. After the server finishes
with the update packet, either successfully or unsuccessfully, it should send back a result
packet containing errors or additional updates resulting from the update operation. If there
are no messages, the results packet should still be sent, but it will have no operation result
nodes.
450 Data Integration (Flash Professional Only)
if the field should be used to locate the row to update. This
true
fieldInfo.isKey
key="true"
umUsingKey
false
false
false
setting, and the type of operation (insert,
fieldInfo
. Otherwise, the field's key attribute in the
umUsingModified
true
true
if the field was
true
modified;
false
otherwise
parameter, it will always
umUsingAll
true
false
true