MACROMEDIA FLASH 8-USING FLASH Use Manual page 561

4.
On the Interactions layer, select the frame you added and select Insert > Timeline >
Blank Keyframe.
5.
To add an interaction, do one of the following:
To copy and paste an interaction that already exists in the Timeline, right-click
(Windows) or Control-click (Macintosh) the keyframe with the interaction and select
Copy Frames. Paste the frame in the blank keyframe that you inserted in step 4. In this
copy of the interaction, modify objects on the Stage or the settings in the Component
inspector, as desired.
To use an interaction from the library, drag the desired interaction movie clip type
from the Learning Interactions library (Window > Common Libraries > Learning
Interactions) to the blank keyframe. Break the interaction apart (select the interaction
and select Modify > Break Apart), and edit the assets and parameters.
Adding learning interactions to a document that
doesn't use a quiz template
If you are adding learning interactions to a Flash document that does not use a quiz template,
you can place stand-alone learning interactions in the Timeline in a single frame, sequential
frames (for example, 10 questions in 10 sequential frames), or labeled frames.
Including a Flash learning interaction in a document 561