Applying A Blend Mode (Flash Professional Only) - MACROMEDIA FLASH 8-USING FLASH Use Manual

Overlay
Subtract
Applying a blend mode (Flash
Professional only)
You use the Property inspector for movie clips to apply blends to selected movie clips.
Multiple graphic symbols are merged as a single shape when you publish the SWF. For
this reason, you cannot apply different blend modes to different graphic symbols.
To apply a blend mode to a movie clip:
1.
Select the movie clip instance (on the Stage) that you want to apply a blend mode to.
2.
Adjust the color and transparency of the movie clip instance using the Color pop-up menu
in the Property inspector. For more information, see
of an instance" on page
3.
Select a blend mode from the Blend pop-up menu in the Property inspector for movie
clips.
The blend mode is applied to the selected movie clip instance.
Hard Light
Difference
91.

Applying a blend mode (Flash Professional only)

Add
Invert
"Changing the color and transparency
241