MACROMEDIA FLASH 8-USING FLASH Use Manual page 290

To update an embedded video clip after editing it in an external editor:
1. Select the video clip in the Library panel.
2.
In the options menu in the upper right corner of the Library panel, select Properties.
3.
Click Update in the Embedded Video Properties dialog box.
The embedded video clip is updated with the edited file. The compression settings you
selected when you first imported the video are reapplied to the updated clip.
Importing linked QuickTime video files
If you are importing a QuickTime video clip, you can link to the video from the Flash file,
rather than embed the video. A linked QuickTime video imported into Flash does not
become part of the Flash file. Instead, Flash maintains a pointer to the source file.
If you link to a QuickTime video, you must publish the SWF file as a QuickTime video. You
cannot display a linked QuickTime clip in SWF format. The QuickTime file contains a Flash
track, but the linked video clip remains in QuickTime format.
For more information on publishing your Flash file as a QuickTime video, see
publish settings for QuickTime videos" on page
You can scale, rotate, and animate a linked QuickTime video in Flash. However, you cannot
tween linked QuickTime video content in Flash.
The QuickTime Player does not support Flash Player files greater than version 5. For
more information, see
To import a QuickTime video as a linked file:
1. Do one of the following:
To link the video clip directly to the current Flash document, select File > Import >
Import to Stage.
To link the video clip to the library for the current Flash document, select File >
Import > Import to Library.
2. In the Import Video wizard, select Link to External Video File, and click Next.
290 Working with Video
476.
"Specifying publish settings for QuickTime videos" on page
"Specifying
476.