MACROMEDIA FLASH 8-USING FLASH Use Manual page 557

Modifying learning interactions in a quiz
Each question in the quiz is considered an interaction. When you use a quiz template, you
place interactions sequentially between the first and last frame of the Interactions layer on the
root Timeline. You may add or remove frames and keyframes as needed, as long as the
interactions remain sequential and the first and last frames are reserved for the Welcome page
and Results page. The number of frames between the Welcome and Results page keyframes
are used to calculate the score.
For example, the following frames would comprise a 10-question quiz:
Frame 1 = Welcome page keyframe
Frames 2–11 = interactions keyframes
Frame 12 = Results page keyframe
These 12 keyframes are on the Interactions layer.
To modify learning interactions in a quiz template:
1. Select the first frame in the Interactions layer and make any modifications you want to the
text of the Welcome page. Make sure you include text to indicate that the user must click
the Next button to continue. Do not add an interaction to this page.
2.
Select each of the learning interactions in the next six frames and do one of the following:
If you want to use the interaction, follow the instructions in
Interaction component" on page
If you do not want to use the interaction, follow the instructions in
learning interaction from the Timeline" on page
3. Select the last frame in the Interactions layer and make any modifications you want to the
text of the Results page. Make sure to leave the supplied dynamic text field names intact,
though, or the results will not appear. Do not delete or place interactions in this frame. If
the Results Page quiz parameter is turned off for the quiz, this frame is not called, but it is
still reserved.
Interactions layer
First frame of the layer
558.
563.
Including a Flash learning interaction in a document
"Configuring a Learning
"Removing a
557