Health Check For Storage Server; Vk Events (Timeline For Vk Viewer) - Canon VB-C300 Administrator's Manual

Ver. 2.2
Hide thumbs Also See for VB-C300:
Table of Contents

Advertisement

Health Check for Storage Server

VK Events (Timeline for VK Viewer)

If any of the events listed in the table below occurs, you may have to take the specified counteraction.
The text within < > in each message depends on the situation.
Event type
Indicates the free
space on the disk
Starts and stops
deletion due to space
shortage. (*)
Pauses and resumes
recording due to
space shortage. (*)
Connection error to the
Camera Server
Recording frame rate
change
For the items marked with (*), see "Important: Disk Space Management" (
Message
warning (on) / ok (off)
Disk space on drive <drive
Name> <situation>
starting (on) / stopping (off)
<situation> deleting files on
drive <drive name> due to low
disk space
starting (on) / stopping (off)
<situation> suspension of
recording on drive <drive
name> due to low disk space
error (on) / ok (off)
Connection to host <Camera
Server Address>: <Port>
<Situation>
Effective recording rate
(<recording rate before
change>
<recording rate
after change> %)
Example:
Ex. "Recording rate (100.0 >
90.0 %)"
* This is not an On/Off event.
Description
This event occurs when the
disk free space has run under
the specified value or the used
disk space has exceeded the
specified valued.
In this case, data may be
deleted before the designated
storage time elapses. Disk
capacity indication is only
effective when it is on.
This event occurs when the
disk free space has run under
the threshold value or the used
disk space has exceeded the
threshold valued.
This event occurs when the
disk free space has run under
the threshold value or the used
disk space has exceeded the
threshold valued.
This event occurs when an
error has occurred while
connecting to the Camera
Server. However, it does not
necessarily occur for every
connection failure. When this
event occurs, the recording
engine tries for reconnection
and a COMM error occurs if
the retry fails.
This event indicates that the
recording frame rate has been
reduced due to increased
server load.
P. 3-17).
Counteraction
example
Review the
recording and
Camera Server
settings
(
P. 3-10, P. 4-24)
Review the network
connection
(
P. 4-19).
Review the
recording settings
or consider adding
the Storage Server
(
P. 4-14).
6-3

Advertisement

Table of Contents
loading

Table of Contents