Canon VB-C300 Administrator's Manual page 101

Configure External Device Input
To switch On or Off the external device input, check the [Invert the state of the following external] option.
One or more inputs may be shown depending on the type of the Camera Server. It is not necessary to change
this setting if it is not required.
Assign a location and zone
1. If multiple [Cam] tabs are shown to the right of the screen, select a tab for the Camera Server to edit settings.
2. Change the name of the Camera Server in the [Camera Name] field as required.
Note
Enter the [Camera Name] in up to 15 characters.
Changing the [Camera Name] setting here does not change the camera name of the Camera Server.
3. In the [Location] field, select a location for the Camera Server from the drop-down menu.
4. In the [Zone] field, select a zone for the Camera Server from the drop-down menu.
If necessary, click [Add] to add another Location or Zone.
The [Add Location] or [Add Zone] dialog opens.
Enter the [Location Name] or [Zone Name] and click [OK].
When you add a Zone in the [Add Zone] dialog, you should also add it to a Location in the same dialog.
Select a location from the drop-down menu.
See P. 4-12 for how to add locations and zones.
Register Camera Server
4-21