Health Check For Storage Server; Vk Events (Timeline For Vk Viewer) - Canon VB-C300 Administrator's Manual

Health Check for Storage Server

VK Events (Timeline for VK Viewer)

If any of the events listed in the table below occurs, you may have to take the specified
counteraction.
The text within { } in each message depends on the situation.
Event type
Indicates the free Indication (on) / recovery (off)
space on the disk {Drive Name} is running out of
space: {Situation}
Starts and stops Start (on)/Stop (off)
deletion due to space Deleting files on Drive {Drive
shortage. (*) Name} due to disk free space
shortage: {Situation}
Pauses and resumes Start (on)/Stop (off)
recording due to Recording paused due to disk
space shortage. (*) free space shortage on Drive
{Drive Name}: {Situation}
Connection error to Error occurrence (on) /
the Camera Server recovery (off)
Connection to host ({Camera
Server Address}: {Port}):
{Situation}
Recording frame rate Effective recording rate
change ({recording rate before
change} ➝{recording rate
after change} %)
Example:
Ex. "Recording rate (100.0 ›
90.0 %)"
* This is not an On/Off event.
For the items marked with (*), refer to "Disk Space Management <Important>" (
Message
This event occurs when the disk
free space has run under the
specified value or the used disk
space has exceeded the
specified valued.
In this case, data may be
deleted before the designated
storage time elapses.
Disk capacity indication is only
effective when it is on.
This event occurs when the disk
free space has run under the
threshold value or the used disk
space has exceeded the
threshold valued.
This event occurs when the disk
free space has run under the
threshold value or the used disk
space has exceeded the
threshold valued.
This event occurs when an error
has occurred while connecting
to the Camera Server. However,
it does not necessarily occur for
every connection failure. When
this event occurs, the recording
engine tries for reconnection
and a COMM error occurs if the
retry fails.
This event indicates that the
recording frame rate has been
reduced due to increased server
load.
Description
Review the
recording and
Camera
Server settings
(➝P. 57, P. 100)
Review the
network
connection
(➝ P. 100).
Review the
recording
settings or
consider
adding the
Storage Server
(➝ P. 88).
➝
P. 64).
Counteraction example
6
221