Canon VB-C300 Administrator's Manual page 263

Failed to trigger manual recording for
camera '<camera name>' on storage
server '<storage server name>'.
*The following message is added when the
number of camera servers exceeds the
licensing restrictions.
Viewing
Number of licenses exceeded.
Screen
This will replace an existing layout of the
same name. Are you sure?
The number of MPEG-4 video windows
exceeds 20.
Do you wish to switch this video window to
display MPEG-4?
You cannot delete
<layout name>
because it is the current layout or it
Saving/
contains the current layout or layout
Managing
sequence.
Video Layouts
You must enter a non blank name. Please
check your settings and try again.
Could not save video because there was
no data to record.
Extracting
The image could not be saved.
Video
Failed to create the MOV file. Please check
the write permission of the file.
Messages Cause
Manual recording could not be started.
An attempt was made to save the layout
sequence using a name that is already
been registered as a layout or layout
sequence.
The number of videos where MPEG-4 was
selected as the [Selection of receiving
image] exceeds 20.
An attempt was made to delete a layout
that is currently being used.
An attempt was made to add a layout
folder without entering the name.
There are no recorded videos for the
selected segment thus they could not be
saved.
The Windows folder or Program Files folder
was specified as the destination folder for
files.
An error occurred when the image file was
being created or while settings were being
saved.
Messages List
9-21