Edit Storage Server - Canon VB-C300 Administrator's Manual

Edit Storage Server

1. In the [Storage and Camera Server Summary], select the [Storage Servers] tab.
A list of Storage Servers which have already been added is displayed.
2. Double-click the Storage Server in the list.
Alternatively, select the Storage Server and click [Edit].
This will bring up the [Edit Storage Server] dialog.
3. Change the settings and click [OK].
Note
You should change the setting of Storage Server in case of the IP address of Storage Server has been
changed.
The Master Storage Server cannot be edited.
4. To save changes, click [Save Changes] at the bottom right-hand corner of the [Camera Summary] window.
Click [Discard Changes] to cancel any changes you have made.
Add Storage Server
4-15