Canon VB-C300 Administrator's Manual page 58

[Storage Server Configuration] Dialog
[Event Notification] Tab
In the [Storage Server Configuration] dialog, [Event Notification] tab allows you to configure the setting of the
e-mail sent to the user when the event occurs.
E-mails are sent according to the priorities set in the [Events] tab.
Example event notification e-mail
An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.
Parking Lot 1: Sensor on
Tip
You can only register one e-mail address in the To Address field.
If you want to send the e-mail to multiple addresses, use a group address.
3-6
Enable e-mail notification and select a priority.
Events of that priority and above will lead to notification emails.
Enter the e-mail subject line, for example, "Immediate Actio
Required". Enter the address of the recipient and enter your
from address.
Enter a Host Name or IP address and Port Number of
mail server for outgoing mail.
Enable authentication (POP-before-SMTP) for connection and
enter [User Name], [Password] and [POP Server] details.
If this is enabled, the Storage Server will attempt to perform a
POP login before sending e-mail that may be required for some
SMTP servers.