Canon VB-C300 Administrator's Manual page 259

Ver. 2.2
Hide thumbs Also See for VB-C300:
Table of Contents

Advertisement

You cannot assign this name to a Storage
Server.
This storage server has already been
added. Please check your settings and try
again.
The Master Storage Server cannot be
edited.
Adding/
Please save or discard your changes
Editing/
before changing your Storage Server
Deleting the
settings.
Storage
Server
The Master Storage Server cannot be
deleted.
The storage server host name is invalid.
Please specify a valid host name or IP
address.
The storage server port is invalid. Please
specify a value between 1 and 65535.
The Storage Server host name cannot be
blank.
A location with this name already exists.
Please use a different name and try again.
A location cannot have an empty name.
Please specify a name and try again.
This location has zones in it. Please remove
these before deleting the location.
Adding/Editing
Please select a location for this zone
a Location and
Zone
A zone with this name already exists in this
location. Please use a different name and
try again.
A zone cannot have an empty name.
Please specify a name and try again.
This zone has camera servers in it. Please
remove these before deleting the zone.
Messages
Cause
An attempt was made to register a Storage
Server by specifying a loop back host/
address ("local host", "127.0.0.1" or
"localhostlocaldomain").
An attempt was made to add a Storage
Server that has been already registered.
An attempt was made to edit the Master
Storage Server.
An attempt was made to change/delete the
Storage Server while there are camera
server settings that have not been saved.
An attempt was made to delete the Master
Storage Server.
The host name or IP address was invalid
when [OK] was pressed.
The port number was invalid when [OK]
was pressed.
Attempted to add or edit a storage server
without entering a name for it.
An attempt was made to register a location
name that is already registered.
An attempt was made to register a location
without entering the name.
An attempt was made to delete the location
for which a zone has been added.
An attempt was made to add a zone while
the location has not been registered.
An attempt was made to add a zone with a
name that has been already registered.
An attempt was made to register a zone
without entering the name.
An attempt was made to delete the zone for
which a camera server has been added.
Messages List
9-17

Advertisement

Table of Contents
loading

Table of Contents