Windows Server 2003/Windows Server 2008 - Canon VB-C300 Administrator's Manual

Windows Server 2003/Windows Server 2008

The default setting of security level of Windows Server 2003/Windows Server 2008 for the Internet or intranet
sites in Internet Explorer is [High].
Therefore, a content block dialog box is displayed when you access pages such as the camera server's top
page or setting page, and commands cannot be carried out. To ensure normal operation, carry out the
procedure below to register the site as a trusted site.
1. When you access the Camera Server top page using Internet Explorer, the dialog box shown at below
appears.
2. Click [Add], and then the [Trusted sites] dialog box appears.
If [Require server verification (https:) for all sites in this zone] is selected, clear the selection.
3. Check that the IP address of your camera server displayed in the [Add this Web site to the zone] box is
correct, and then click [Add] to register the camera as a trusted site.
For more information on registration to the trusted sites, click [Learn more about Internet Explorer's
Enhanced Security Configuration] in the dialog box shown in step 1 and see the summary provided.
If you have enabled the [Windows Firewall] settings, please see the "Notes on Use with Windows XP" (
1-12) and follow the instructions.
Additionally, even when a content block dialog box is not displayed, JavaScript may be disabled under
standard security settings, limiting the available operations in the camera's settings page or the VB-C500/
VB-C60 Viewer. JavaScript will be enabled automatically once trusted site registration is complete, so
please carry out registration.
Notes on Operating Environment
1-13
1 1
P.