Canon VB-C300 Administrator's Manual page 260

Messages List
This camera server has already been set
up to record to the selected storage server.
Please check your settings and try again.
Please select a location and a zone.
Please select a location and a zone.
<Camera number>
A camera server with the same host name
Adding a
and port is currently queued for deletion.
Camera
You must save changes before adding this
Server
camera server.
The camera server host name for live
viewing is invalid. Please specify a valid
host name or IP address.
The camera server port for live viewing is
invalid. Please specify a value between 1
and 65535.
The camera server host name for the
storage server is invalid. Please specify a
valid host name or IP address.
The camera server port for the storage
server is invalid. Please specify a value
between 1 and 65535.
There has been a problem modifying
schedule day '<schedule name>' for
camera '<camera name>' on storage
server '<storage server name>'. This
change may not have been reflected on the
storage server.
There has been a problem deleting
schedule day '<schedule name>' from
Recording
camera '<camera name>' on storage
Schedule
server '<storage server name>'. This
change may not have been reflected on the
storage server.
There has been a problem retrieving
schedules from storage server '<storage
server name>'.
9-18
Messages Cause
Even though video of a camera server is
configured to be recorded in the Storage
Server, the IP address and port used are
the same as the camera server that has
been configured in the Storage Server.
An attempt was made to add a camera
server without selecting a location and
zone.
An attempt was made to add a camera
server without selecting a location and
zone. This is displayed when VB150 is in
the [simultaneous] mode and multiple
cameras are connected.
After deleting the camera server, an
attempt was made to add the camera
server again when the changes have not
been saved.
An attempt was made to connect with an
invalid host name/IP address.
An attempt was made to connect with an
invalid port number.
An attempt was made to connect to the
Storage Server with an invalid host name/IP
address.
An attempt was made to connect to the
Storage Server with an invalid port number.
The destination Storage Server was not
found when you attempted to save the
schedule.
The destination Storage Server was not
found when you attempted to delete the
schedule.
The Storage Server in which the schedule
is to be saved was not found when you
attempted to display the [Recording
Schedules] window or to switch the
Storage Server.