Canon VB-C300 Administrator's Manual page 122

Change Camera Server Settings
Items related to recording schedule setting are as follows. See the Camera Server's manual for details.
User Name and Password
• Set the user name and password for the Camera Server. You cannot set them with VK-64/VK-16.
Motion detection recording
• If the Camera Server is VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi,
or VB150, you can configure the Motion Detection settings on the Camera Server.
• To configure the Motion Detection settings on VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR,
VB-C50FSi, VB-C50Fi, or VB150, use the VB Administration Tools supplied with the Camera Server.
• For VB150 ([Video Input] should be set to [Single]), the Motion Detection settings are configured
using the VK-64/VK-16 [Motion Detection Settings] dialog (
• The Motion Detection function is not suitable for conditions where high reliability is required. It is not
recommend using this function in situations where high reliability is required, such as for monitoring
purposes. Canon accepts no liability whatsoever for faults, etc. resulting from the use of the Motion
Detection.
Image/Video Quality
• You can set the image/video quality. The Motion Detection settings may be affected by the video
quality setting of the Camera Server. When changing the video quality on the Camera Server, be sure
to check the settings for Motion Detection.
Camera Name
• Set the name of the camera displayed in the [Camera Server] list. You cannot set them with VK-64/
VK-16.
4-42
P. 4-47).