Canon VB-C300 Administrator's Manual page 123

Preset
• Presets should be set on the Camera Server in advance. You cannot set them with VK-64/VK-16.
• If the recording settings using a preset are used on the Camera Server, the preset position will
override camera positions set by VK-64/VK-16, including those in recording schedules and Camera
Server position. The camera control will be lost when starting to control the camera at the Camera
Server.
• If predefined presets are not shown in the [Preset] drop-down menu even though they have been
defined on the Camera Server, click [Get Camera Control] to display the [Camera Control] Panel,
obtain camera control, then configure the settings again.
Restrict Service Time
• If a Camera Server has been configured with [Service time restricted] enabled, VK-64/VK-16 will be
able to record from the Camera Server during restricted times.
External Device
• Specify the name of the external device, such as sensor name. You cannot configure it with VK-64/
VK-16.
• If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it.
Sensor Input, Recording to Camera Memory
• Camera Servers have certain features to capture image into its memory based on sensor input or
schedule. If settings are enabled on the Camera Server, those settings take precedence.
Change Camera Server Settings
4-43