Visonic POWERMAXPRO User Manual page 14

When the system is disarmed, after presenting a
valid proximity tag to the control panel, the message
"<OK> for AWAY" is displayed. Now you can press
the button to immediately arm the control
panel, or wait for 3 second for system automatic
AWAY arming (the message "Please exit now" will
be displayed). Presenting the proximity tag once
again will DISARM the system.
D-302542
SECURING THE PROTECTED SITE
Instead of pressing the
you can press the
message "<OK> for HOME" / "<OK> for disarm" is
displayed, accordingly) and then press the press
The control panel transmits an RF signal. A valid
proximity tag that is presented to the control panel
transmits a coded RF signal back to the control unit.
button (see above),
button once / twice (the
button for HOME arming / disarming.
13