Response Sequences; Mct-237; Mcm-140; Mkp-150/Mkp-151 - Visonic POWERMAXPRO User Manual

APPENDICES

Response Sequences

Partitions status is indicated in the following manner:
P1:X P2:X P3:X

MCT-237

The MCT-237 two-way wireless keyfob is used to
control single or all partitions.
Arming/Disarming All Partitions
To arm/disarm all partitions, press the HOME /
AWAY / DISARM button on the keyfob.
Arming/Disarming a Single Partition
To arm/disarm a single
PARTITION SELECTION button on the keyfob once.
In this state repeated pressing of the PARTITION
SELECTION button will toggle between the enabled
partitions and Partition All. To arm/disarm the desired
partition(s), press the HOME/AWAY/DISARM button.

MCM-140+

The wireless remote commander is used to control
single or all partitions.
Arming/Disarming All Partitions
To arm all partitions, press the HOME / AWAY /
DISARM button followed by the user code.
Arming/Disarming a Single Partition
To arm/disarm a single partition, press the "LIGHT"
button followed by the desired partition number (1, 2
or 3). When the red LED turns OFF, press the
HOME/AWAY/DISARM button within 5 seconds
followed by the user code.

MKP-150/MKP-151

The two-way wireless keypad is used to control
single or all partitions and functions in the same way as
the PowerMax Pro control panel. See the Show
40
partition, press the
Each X value indicates a different partition state, as
follows:
R Ready
N Not ready
A Away
H Home
E Exit delay
D Entry delay
- Partition disabled
MCT-237
AWAY
HOME
AUX 1
MCM-140+
3-color
Buzzer LED
Away
2
Home
5
8
Aux
0
* #
Emer-
gency
Panic
Functions section above (substitute the
button with the button).
DISPLAY
DISARM
PARTITION
SELECTION
AUX 2
Light
Off
Prog.
mode
Fire
D-302542