Muratec MFX-2350 User Manual page 613

■
Copy-Related
Error message
ADF cannot be specifi ed
ADF is unavailable.
Set document on the FBS glass.
Cannot punch the auto-selected
paper.
Cannot staple the auto-selected
paper.
Copy reservation is disable.
Enter reduce/enlarge
Load paper for duplex copying
Paper inappropriate for duplexcopy
Load paper in the bypass
Load plain paper to staple.
Load plain paper to punch.
Not enough memory
Not enough memory
The last * page was erased.
Please copy again
Paper size error
Cassette paper size error
Check the direction and
size of the paper.
Paper size is unsuitable.
Select another paper direction
or adjust the ratio.
Please empty the punch box.
No punch box or punch box is full.
Please enter a value between 25-
400%
Please input ratio within 25%
- 400%
Rotate document 90˚ or set the ratio The document orientation will be different depending on com-
Set document in the ADF.
Staple cartridge is empty.
Replace the staple cartridge.
This paper cannot print to upper
tray.
Countermeasure
You tried to set the function which cannot be used in the ADF.
The document is loaded in the ADF in case of the series copy. Load
the document on the document glass.
Automatically selected paper cannot be used for stapling or punch-
ing. Select the paper manually.
Paper which is not used for stapling or punching is specifi ed.
Cannot copy because the copy reservation setting is OFF. Set it to ON.
Custom paper cannot be copied by automatic zoom.
Set the magnifi cation.
Duplex copy is not available for the paper indicated in the mes-
sage. Select another paper.
Paper in the bypass tray has run out. Supply paper in bypass tray
Paper type which is not used for stapling or punching is specifi ed.
Only plain paper can be used for stapling or punching.
The document could not be accepted due to insuffi cient memory.
Load the document again after the current operation such as
printing fi nishes.
Copying was interrupted due to insuffi cient memory. Restart copy-
ing from the displayed page.
A paper size different from the one recognized by the machine has
been detected. Check the direction and the size of paper. Press
[Yes] to continue copying.
Rotate copy cannot be executed in case of the combined copy or
booklet copy. Load the document as shown in the screen display.
Paper which is not used for stapling or punching is specifi ed.
Punches in the punch box become full. Dispose of the punches.
The punch box has not been installed properly. Install the punch
box properly.
The entered ratio cannot be used. Enter the correct ratio.
The entered ratio is incorrect. Enter the size that will result in a
correct ratio.
bined, repeat, series, or booklet copies. Rotate the document by 90˚
or set the ratio.
The document glass cannot be used for the booklet copy. Load the
document in the ADF.
Staples have run out. Replace with a new staple cartridge.
The paper indicated in the message cannot be printed in the upper
tray. Select another cassette.
Error Messages
●
In This Case... Maintenance and Troubleshooting
Getting
Started
Reference page
−
COPY
2-44
Chapter1
2-88
COPY
Chapter2
2-88
COPY
2-106
Chapter3
2-18
1-32
FAX
Chapter1
1-38
FAX
2-88
Chapter2
−
FAX
Chapter3
−
FAX
Chapter4
1-35
FAX
Chapter5
2-30, 2-74
SCAN
Chapter1
2-88
6-28
SCAN
Chapter2
SCAN
2-20
Chapter3
2-20
−
Function
Settings
2-74
In This
Case...
6-21
5-29
Appendix
6-37