Muratec MFX-2350 User Manual page 607

T: Transmission Errors
Mode Error code
T.5.1, T.5.2, The line is disconnected during
T.5.3 transmission (due to a line error)
T.8.10, Due to a line error, communication
T.8.11 failed
T.8.1 The reception mode does not match
R: Reception Errors
Mode Error code
Your machine is set to manual
reception or transfer reception and
R.1.1
is ready to receive, but no signal
comes from the sending party
Your machine's mode does not
match with the sending party's
Junk fax is received when the junk
R.1.2 fax block function is on (only dis-
played in the auto print journal)
Due to the closed reception in the se-
curity function, your passcode does
not match with the sending party's
The <Stop> key was pressed when
R.1.4 starting the communication (only
displayed in the auto print journal)
R.1.5 Due to a line error, communication failed
R.2.3 Due to a line error, the line is disconnected
Pulled out the document or the <Stop>
R.3.1
key was pressed by the sending party
Due to a line error, the signal cut off
R.3.3
during reception (due to line error)
Reception is not available even at the
R.3.4
slowest speed (due to a line error)
R.3.5 Due to memory overfl ow, the recep-
tion failed
Due to a line error, the signal cut off
R.4.2
during reception (due to line error)
Memory overfl ow (only the auto
R.4.4
print journal is displayed)
R.5.1 The signal cut off during reception
The sending party pressed the <Stop> key
R.5.2
R.8.10, Due to a line error, the signal cut off
R.8.11 during reception (due to line error)
Your machine's mode does not
R.8.1
match with the sending party's
Description of code
Description of code
Countermeasure
Resend the document. If this error occurs repeatedly,
contact your Muratec dealer.
Check the other machine. The receiving party may not be
using a fax machine.
Countermeasure
The sending party may have made an operational mis-
take. If you know who the sending party is, ask them to
resend the document.
If you know who the sending party is, ask them to resend
the document. If this error occurs repeatedly, contact
your Muratec dealer.
Check the sending party's passcode.
If you know who the sending party is, ask them to resend
the document.
If you know who the sending party is, ask them to resend
the document. If this error occurs repeatedly, contact
your Muratec dealer.
Check the amount of memory left and ask the sending
party to resend.
If you know who the sending party is, ask them to resend
the document. If this error occurs repeatedly, contact
your Muratec dealer.
If you know who the sending party is, ask them to resend
the document. If this error occurs repeatedly, contact
your Muratec dealer.
Check the other machine. Their machine may not have
the document in case of polling operation.
In This Case...
Error Messages
●
Maintenance and Troubleshooting
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
6-31