Copying With Staples Or Punching Holes (Option); Finishing Options - Muratec MFX-2350 User Manual

Copying with Staples or
Punching Holes
By attaching the fi nisher and the punch kit you can perform a variety of fi nishing functions.

Finishing options

●Staple
Sets may be single-stapled in the upper left corner or doubled stapled on the left side or top of the document.
Note
The fi nisher can staple approximately 50 sheets at maximum.
Thick paper, envelopes and OHP fi lms cannot be stapled.
●
Hole punch(When the optional punch kit has been installed.)
Documents are hole punched for easy fi ling. This setting may be combined with "Non-Sort", "Sort", "Shift" or
"Staple". Documents can be either two or three hole punched.
Note
Thick paper, OHP fi lms and envelopes cannot be hole punched.
(Option)
●
COPY Chapter2 Advanced Copy Features
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
2-87