Loading Paper In The Bypass Tray - Muratec MFX-2350 User Manual

Getting
Started

Loading paper in the bypass tray

Use the bypass tray to print on plain paper, postcards, envelopes, OHP fi lm and label sheets. The
loaded paper will be printed on the downward side.
Reference
· When loading anything other than plain paper, the paper type must be set. (page 1-45)
· When loading custom size paper, the paper size must be registered. (page 1-45)
Note Note
When loading paper that When loading paper that
is larger than the bypass is larger than the bypass
tray, open the extension tray, open the extension
tray. tray.
Note Note
· Load the paper so that · Load the paper so that
it does not go higher it does not go higher
than the [▼] mark. than the [▼] mark.
· Align the guide plate · Align the guide plate
fi rmly against the edge fi rmly against the edge
of the paper. of the paper.
1-38
Getting Started
1
Open the bypass tray.
2
Align the guide plate to the
paper size, face the printing
surface downward, and load the
paper by inserting its edge all
the way to the back.
Bypass Bypass
tray tray
Extension Extension
tray tray
Guide plate Guide plate