Muratec MFX-2350 User Manual page 29

Storing and handling the toner bottle
To avoid damage to your machine and to assure the best performance possible, follow these guidelines when stor-
ing and handling toner bottles:
Store the toner bottle
Store toner bottles at a constant temperature within a range of 50ºF to 95ºF (10ºC to 35ºC). Do not store bottles
in locations subject to extreme fl uctuation of temperature and humidity.
Do not open the protective bag of the bottle until you are ready to install the bottle.
Never handle your machine or power cord with wet hands
Never touch your machine or power cord if your hands are wet.
During electrical storms, disconnect the plug from the outlet
Electrical storms can cause electrical shock or damage the machine.
Do not put furniture or equipment on the power cord
Do not put anything on or over the electrical power cord, and do not
route the power cord under rugs or carpets. Doing so can damage the
power cord or fax, and can cause fi re or electrical shock.
Avoid temperature fl uctuations
Sudden changes in temperature can cause damaging condensation to
form inside your machine.
Allow clearance around the outlet
Don't stack boxes or furniture around the outlet.
Always operate these products in well ventilated areas
Operating the product in poorly ventilated areas for an extended time
period could pose health risks.
Be sure to frequently ventilate the operating area.
Use supplies manufactured specifi cally for Muratec machines
Using toner bottles and other supplies that are not manufactured spe-
cifi cally for Muratec machines may affect the operation of your unit.
Getting Started
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
FAX
Chapter5
SCAN
Chapter1
SCAN
Chapter2
SCAN
Chapter3
Function
Settings
In This
Case...
Appendix
1-9
Getting Started